nsg435静电模拟器 -k8凯发


compact and cost effective

  • programmable discharge voltage 200 v to 16.5 kv
  • stabilized charging voltage
  • pre-programmed iec/en 61000-4-2 test settings
  • true air-discharge breakdown voltage
  • compact and lightweight design


ergonomic design and advanced functionality. the pistol-shaped nsg 435 simulator is designed to sit comfortably in the operator’s hand, with current operating conditions constantly displayed and clearly visible.

nsg 435’s microprocessor-based controller and multifunction keypad provide the operator with instant access to its comprehensive range of built-in functions. the lcd panel continuously displays the operating status and all user-selected test parameters.

nsg 435 has its own internal, battery operated high voltage generator. in addition to the pre-programmed, standard iec pulses, the user can create custom tests using single or repetitive discharges with selectable rates and manual or automatic polarity switching. an optional mains supply is available for extended test operation or for use when the battery is being charged.


basic set

carrying case with: electrostatic discharge simulator, battery pack, battery charger 100 to 240 vac, discharge network 150 pf/330 ω, air- and contact-discharge tips, grounding cable, tripod adapter, user manual


network 150 pf/330 ω as per iec/en 61000-4-2 (included)
range of r/c networks for other standards: r = 0 ω to 10 kω; c = 60 to 500 pf

discharge voltage

air-discharge: 200 v to 16.5 kv (in 100 v steps)
contact-discharge: 200 v to 9 kv (in 100 v steps)


ball and point as per iec

charging voltage measurement

kv, accuracy better than ±5% (stabilized); measurement and display of true air flashover voltage

discharge detection

indicated by an oval around the kv symbol, also acoustically in the 'single' operating mode (air-discharge only)

holding time

>5 s (charging voltage ... ±5%)


positive / negative / automatic change

operating modes

single / repetitive =
pulse counter: 0 to 9999, preselect counter 0 to 9999
repetition: 0.5/1/5/10/20 or 25 hz (air); 0.5/1/5 or 10 hz (contact);
continuous operation


lcd panel showing: charging voltage, discharge voltage, polarity, air-/contact-discharge, counter/preselect counter content, soft-key functions, battery monitor


nsg 435 with battery: 1.2 kg (2.6 lbs) approx.

ambient conditions

operation: 5 to 40°c, 20 to 80 % r.h. (non-condensing), 68 to 106 kpa